What's in the Queensplace XXL Toolkit and When to Use It
By Cat Tree King | Published: 2026-10-31
Category: How-to Guides
The Queensplace XXL toolkit is a screw set for the RHR Pets cat tree. Learn what it covers, when to reach for it, and how to use it for assembly and maintenance.
Quick answer
The Queensplace XXL toolkit is a screw set for the Queensplace XXL cat tree from RHR Pets. Use it during initial assembly and whenever you need to replace or tighten a screw on that model.
Why a model-specific screw set matters
Cat trees use screws in several places: platforms, posts, and connecting brackets. A generic assortment can leave you guessing which length goes where. The Queensplace XXL toolkit is matched to that specific RHR Pets model, so you spend less time sorting and more time assembling or repairing.
Keep the set with the cat tree rather than in a general toolbox. That way it is on hand for assembly day and for later checks when a screw works loose.
When the toolkit is the right tool, and when it is not
This set covers screws and spare components for the Queensplace XXL. It is not a general-purpose hardware kit for other cat trees or furniture, and it does not replace the basic hand tools you need to drive the screws. If you are assembling a different model, check that model's own parts list instead.
For routine maintenance, a quick tighten is often enough. Reserve replacement screws for when a screw is missing, stripped, or visibly damaged.
How to use the Queensplace XXL toolkit step by step
- Check the parts list before you start: Lay out the screws from the toolkit and compare them with the Queensplace XXL assembly instructions. Group them by size so you can grab the right one without sorting mid-build. If any screw type is missing from the set, stop and request it before assembly rather than substituting a different size.
- Match each screw to its location: Follow the instructions for which screw goes into each platform, post, or bracket. Hand-thread each screw first to confirm it seats smoothly before tightening. A screw that binds immediately is usually the wrong length or angle; back it out rather than forcing it.
- Tighten in stages, not all at once: Drive screws partway on all connections first, then go back and tighten them fully. This lets the parts shift into alignment as you work. Check that platforms sit level before the final tighten; loosening a fully tightened screw to adjust is harder on the wood.
- Store the remaining screws with the tree: Keep unused screws from the set in a labeled bag or container near the cat tree, not in a mixed hardware drawer. Label the bag with the model name so you can identify the set later.
- Do a periodic tighten and replace as needed: Every few months, check the screws on high-traffic platforms and posts. Tighten any that have loosened, and replace missing or damaged screws from the toolkit. Replace a screw only when it is missing, stripped, or damaged; overtightening a healthy screw can damage the wood.
Product facts
- Toolkit Queensplace XXL: This is a screw set for the Queensplace XXL cat tree from RHR Pets. Having the correct screws for this model reduces guesswork during assembly and repairs.
Toolkit Queensplace XXL
