Big Cat Palace Blackline Light Grey Assembly Guide
By Cat Tree King | Published: 2026-10-30
Category: How-to Guides
Learn how to assemble the Big Cat Palace Blackline Light Grey cat tree with step-by-step instructions, common mistakes to avoid, and tips for a stable setup.
Quick answer
Assemble the Big Cat Palace Blackline Light Grey cat tree by following the included manual, but pay special attention to aligning the 6-inch thick sisal poles with the platforms before tightening screws to avoid wobble.
Why assembly matters for large cat trees
The Big Cat Palace is designed for large, heavy cats or multiple cats. A poorly assembled tree can wobble or tip, making it unsafe. Proper alignment of the thick sisal poles and platforms is critical for stability.
The light grey finish shows dust and paw prints easily, so handle the fabric-covered parts with clean hands or wear gloves during assembly.
Assembly steps
- Prepare your workspace and tools: Clear a large, flat area. Lay out all parts and hardware. You will need a Phillips head screwdriver (not included). Do not use power tools, as over-tightening can strip the particleboard threads. Check that all parts match the manual before starting.
- Attach the base platform to the first sisal pole: Insert the 6-inch thick sisal pole into the base platform's pre-drilled hole. Ensure the pole is fully seated before tightening the screws from underneath. Common mistake: tightening screws before the pole is fully inserted, causing a gap. Rock the pole gently to confirm it is flush with the base before tightening.
- Stack remaining platforms and poles: Slide each subsequent platform onto the next pole section. Align the screw holes exactly. Tighten screws in a star pattern (tighten one, then the opposite, then the next) to distribute pressure evenly. Common mistake: tightening one screw fully before the others, which can warp the platform. Hand-tighten all screws first, then go back to fully tighten.
- Install the cat hideaway and top lying area: The hideaway attaches to the designated platform. Slide it into place and secure with the provided bolts. The large top lying area attaches last. Ensure the hideaway door faces outward for easy cat access. Common mistake: mounting the hideaway upside down, which blocks the entrance. Check the hideaway orientation before securing it.
- Stabilize and check for wobble: Place the assembled tree on a level floor. Gently push each platform. If any platform wobbles, recheck the screws and pole alignment. For extra stability on carpet, place a heavy book or sandbag on the base for 24 hours. Common mistake: assuming all screws are tight when one is cross-threaded. Test the tree with a gentle shake before letting your cat use it.
Product facts
- Big Cat Palace Blackline Light Grey: The Big Cat Palace Cat Tree features 6 inch thick sisal poles, making it suitable for large, heavy, or multiple cats. The thick poles require careful alignment with the platform holes during assembly; a slight misalignment can cause the tree to be unstable.

Big Cat Palace Blackline Light Grey
