How to Install a 20.5x6 Sisal Pole on Your Cat Tree
By Cat Tree King | Published: 2026-10-26
Category: How-to Guides
Learn how to mount a 20.5 inch sisal pole with a 6 inch diameter and M8 screws on your Cat Tree King cat tree, including tools, alignment, and common mistakes.
Quick Answer
To install a 20.5x6 sisal pole with M8 screws, align the pole's screw holes with your cat tree's mounting points, then tighten the bolts securely. Confirm your tree has the same thickness and screw size before starting.
Before You Start: Check Compatibility
The 20.5 inch sisal pole with a 6 inch diameter uses M8 screws at both ends. Before you begin, verify that your cat tree has the same pole thickness and screw size. If the original pole is thinner or uses a different screw, the new pole won't fit securely.
The sisal on this pole is glued to an ABS interior, making it extra strong. That also means it's heavier than a smaller pole, so ensure the mounting plates on your tree can support the weight.
Gather the Right Tools
You'll need a screwdriver or drill with the appropriate bit for M8 screws, and possibly a wrench for tightening. Have a level on hand to ensure the pole stands straight. Work in a clear area so you can see the alignment clearly.
Installation Steps
- Remove the old pole: Unscrew the existing pole from the cat tree using a screwdriver or drill. Keep the screws and any washers, as you may reuse them if they match the M8 size. Check that the old screws are M8 and in good condition; replace if stripped.
- Align the new pole: Position the new 20.5x6 sisal pole so the top and bottom M8 screw holes line up with the mounting holes on the cat tree. Use a level to ensure the pole is vertical. If the holes don't align, rotate the pole slightly; do not force it.
- Insert and tighten screws: Insert the M8 screws through the mounting plates into the pole's screw holes. Tighten them alternately (top then bottom) to ensure even pressure. Avoid overtightening, which can strip the threads. After tightening, gently wiggle the pole to confirm it's secure and doesn't wobble.
Product Details
- Sisal Pole 20.5 inch x 6 inchØ - M8 (Beige): This sisal pole has 1 M8 screw hole at the bottom and 1 at the top, a 6 inch diameter, and is 20.5 inch long. Knowing the exact screw hole positions helps you align the pole correctly with your cat tree's mounting points, avoiding misalignment during installation.
Sisal Pole 20.5 inch x 6 inchØ - M8 (Beige)
