Attach a Large Lying Area Step With Play Rope to a Pole

Quick answer

To attach a large lying area step with a play rope, you need to slide the step onto the sisal pole, secure it with the included hardware, and then fasten the play rope to a nearby anchor point.

Step-by-step assembly

1. 1. Position the step on the pole: Slide the step's mounting bracket over the sisal pole at your desired height. Ensure the bracket is fully seated and the step is level. Common mistake: Forgetting to align the bracket before tightening can cause the step to sit crooked.
2. 2. Secure the bracket: Tighten the included screws or bolts evenly on both sides. Do not overtighten—this can strip the threads or crack the bracket. Use a screwdriver or Allen key as provided. Check for any side-to-side movement after tightening. If it shifts, loosen and re-tighten with even pressure.
3. 3. Attach the play rope: Loop the play rope around a sturdy part of the cat tree frame, such as a top platform or another pole. Tie a secure knot (e.g., a double overhand knot) and trim excess rope. Common mistake: Leaving the rope too long can create a tripping hazard or allow your cat to get tangled. Test the rope's tension by gently pulling. It should be taut but not stretched.
4. 4. Test for stability: Press down on the step with moderate force to simulate a cat's weight. If the step tilts or the bracket slides, re-tighten the screws. If the pole is worn or slippery, consider adding a non-slip pad between the bracket and pole. Always supervise your cat during the first few uses to ensure they adapt safely.

Product details

• Large, Dark Grey Lying Area Step With Play Rope Triangular (for 5, 6 or 8 inch poles): The dark grey lying area step is 22x22x22 inches and includes a play rope made from natural sisal. The large size supports heavy cats comfortably, and the natural sisal rope encourages healthy scratching and play.