Terug naar blog
Handleidingen 2026-11-20 Cat Tree King 0 weergaven

How to Install a Curve Slide on Your Cat Condo

How to Install a Curve Slide on Your Cat Condo

Learn how to install the Slide 22x8 (light grey) on your Cat Condo or Cat Mansion. This guide covers compatibility, preparation, and step-by-step attachment.

What You Need to Know Before Installing a Curve Slide

The Slide 22 x 8 (Light Grey) is a spare component designed specifically for the Cat Condo and Cat Mansion from Cat Tree King. It is not a universal slide for any cat tree — it only fits these two models. Before you begin, confirm that your cat tree is either a Cat Condo or a Cat Mansion. If you have a different model, this slide will not attach properly.

This guide assumes you already own the Cat Condo or Cat Mansion and have received the Slide 22 x 8 as a replacement or upgrade part. The supplied information confirms it is a spare component that you can reorder to replace a current cat tree component. No special tools are mentioned, so standard screwdrivers or Allen wrenches from your original assembly kit should suffice.

Step-by-Step Installation Process

Follow these steps to attach the Curve Slide to your Cat Condo or Cat Mansion.

  1. Prepare the area and locate mounting points: Clear the area around your cat tree. On your Cat Condo or Cat Mansion, identify the location where the slide will attach. The slide is designed to replace an existing component, so look for a similar-sized opening or bracket where the previous part was mounted.
  2. Remove the existing component: If you are replacing a current cat tree component, carefully unscrew and remove it. Keep the screws and hardware — they may be reused for the slide. Set the old part aside.
  3. Attach the Slide 22 x 8: Position the Slide 22 x 8 (Light Grey) over the mounting holes. Align the screw holes on the slide with those on the cat tree. Secure it using the screws you removed earlier or the hardware that came with your original assembly. Tighten firmly but avoid overtightening, which could strip the plastic.
  4. Check stability and test: Gently wiggle the slide to ensure it is firmly attached. Allow your cat to investigate the new addition. Observe the first few uses to confirm the slide stays secure. If any wobble develops, retighten the screws.

Slide 22 x 8: Key Facts

  • Slide 22 x 8, Cat Condo & Cat Mansion (Light Grey): This is a slide for the Cat Condo and Cat Mansion from Cat Tree King. This is a spare component that you can reorder to replace a current cat tree component. Confirms that the slide is not a standalone accessory but a replacement part for these two specific models. You cannot install it on a different cat tree.
    Slide 22 x 8, Cat Condo & Cat Mansion (Light Grey)
    Slide 22 x 8, Cat Condo & Cat Mansion (Light Grey)
  • Slide 22 x 8, Cat Condo & Cat Mansion (Light Grey): You can buy all your cat tree parts at Cat Tree King, your cat tree specialist! If you need additional screws or other parts for installation, Cat Tree King stocks compatible components for the Cat Condo and Cat Mansion.

What the Supplied Information Does Not Cover

The product record does not include specific torque values, screw sizes, or a detailed diagram. Use common sense when tightening: snug is sufficient. If you encounter missing hardware, contact Cat Tree King for compatible screws. The slide is a spare component, so no additional instructions beyond replacement are provided. For original assembly steps, refer to your Cat Condo or Cat Mansion manual.

Gerelateerde artikelen

Customer Service
Home
Producten
Winkelwagen
Profiel