Back to Blog
How-to Guides 2026-11-15 Cat Tree King 0 views

Sisal Step Component Set of 3: Build a Cat Ladder Wall

Sisal Step Component Set of 3: Build a Cat Ladder Wall

Plan a DIY cat wall ladder with the Blackline Tiger sisal step set. Learn what the spare component covers, how to check fit, and how to sequence a safe wall route.

What this set actually is—and what it is not

The Sisal Step Component (set 3 pcs) (Blackline), Tiger is a spare-part kit: three Blackline sisal panels made for the Tiger steps from Cat Tree King. It is designed so you can reorder and replace a current cat tree component, not so you can invent a new ladder from scratch without checking what the panels attach to.

That distinction matters for anyone searching for cat ladder wall steps or DIY cat climbing steps. The set gives you replacement sisal step surfaces in a three-pack. It does not, by itself, supply mounting brackets, wall hardware, a frame, or a complete new ladder system. If your plan is to build a wall route from bare wall to top, treat this set as one part of the project and confirm the rest of the mounting method separately.

The supplied product facts behind the fit decision

  • Sisal Step Component (set 3 pcs) (Blackline), Tiger: Blackline Sisal panels, set of 3, for the Tiger steps from Cat Tree King. The set is tied to a specific step design—the Tiger steps—so the first compatibility check is whether your existing steps are Tiger steps, not whether the color matches.
    Sisal Step Component (set 3 pcs) (Blackline), Tiger
    Sisal Step Component (set 3 pcs) (Blackline), Tiger
  • Sisal Step Component (set 3 pcs) (Blackline), Tiger: This is a spare component that you can reorder to replace a current cat tree component. The intended use is replacement, which makes this a sisal step replacement purchase rather than a universal add-on for any wall ladder.
  • Sisal Step Component (set 3 pcs) (Blackline), Tiger: Available variant evidence lists a Standard option. There is one supplied variant name, so the main decision is quantity and fit rather than choosing among sizes or colors.

A practical order for a Tiger-step replacement or ladder refresh

Use this sequence when the set is going onto existing Tiger steps or when you are refreshing a route that already uses them. It keeps the replacement grounded in what the supplied record supports.

  1. 1. Identify the steps you are replacing: Check that the worn surfaces are the Tiger steps the panels are made for. The supplied record names the Tiger steps specifically; it does not describe universal fit across other step models.
  2. 2. Count how many panels your route needs: The set contains three panels. Count the step surfaces you intend to refresh before ordering so you know whether one set covers the job or whether you need more than one.
  3. 3. Remove the old sisal surface: The supplied information describes the panels as a replacement component but does not include a removal procedure. Follow the original assembly or replacement method for your Tiger steps rather than guessing at fasteners.
  4. 4. Fit the new Blackline panels: Install the panels as the replacement for the current step component. Because the record does not list tools, torque values, or a step-by-step fastening method, use the fitting approach that came with your original steps.
  5. 5. Check the route before regular use: With the panels in place, confirm each step is secure and the route still works for your cat. The supplied evidence does not include load ratings or safety test results, so a hands-on stability check is the responsible checkpoint.

Cat wall ladder spacing: what you can and cannot settle from this record

Spacing is the question most DIY cat climbing steps projects run into, and it is where the supplied information stops short. The product record does not give a recommended vertical gap, step depth, or wall-mount height for the Tiger steps or for this panel set. That is a real limitation, not a detail to fill in with a guess.

What you can do is treat spacing as a measurement problem for your own cat and your own wall. The set is a replacement surface, so the spacing of your existing Tiger steps is already set by their frame or mounting system. If you are extending a route, confirm the mounting hardware and spacing method separately before you buy panels, because the panels alone do not define the ladder geometry.

For a cat ladder wall steps plan, the honest sequence is: settle the mounting system first, then decide how many step surfaces you need, then order the sisal panels to match. Buying the panels first and hoping the rest follows is the wrong order.

Replacement purchase vs. new-build purchase

The same three-panel set serves two different shoppers, but only one of them is directly supported by the supplied record.

  • Replacing worn Tiger step surfaces: Directly supported: the set is described as a spare component for the Tiger steps, so reordering to replace a current component is the intended use.
  • Building a new wall ladder from bare materials: Only partly supported: the panels are step surfaces, and the record does not supply brackets, wall hardware, a frame, or spacing guidance. You would need to source and verify the rest of the system separately.
  • Mixing with other step models: Not confirmed: the record names the Tiger steps, and no universal compatibility claim is supplied. Check fit before assuming the panels suit a different step design.

Checks to run before you order the set

  • Confirm the step model: The panels are for Tiger steps. If you are unsure which steps you have, identify them before ordering rather than relying on appearance.
  • Count panels against steps: Three panels per set. Match the count to the number of step surfaces you plan to refresh.
  • Confirm the rest of the route: For a new build, verify the mounting method and spacing plan first. The supplied record does not cover either.
  • Check the variant: The supplied variant evidence shows a Standard option only. Confirm that is the version you need before checkout.

Where the Blackline finish fits in a multi-step route

Blackline is the finish named in the product title, and the set is sold as three matching panels. If your Tiger steps already use Blackline, a three-panel set lets you refresh a run of steps with a consistent look rather than patching one worn surface at a time. If your steps are a different finish, the supplied record does not describe color-matching options, so confirm the finish before you order.

The catalog price is listed at USD 27.45 against a comparison price of USD 45.00. That price positioning makes a three-panel refresh a relatively low-cost way to extend the life of existing Tiger steps, but it does not change the compatibility checks above.

Related Articles

Customer Service
Home
Products
Cart
Profile